The Best Round, In-Ground Trampoline Kit Available In Utah!
Our 12' round in-ground trampoline system one of the fastest and easiest in-ground trampolines to assemble. Our universal wall system is the strongest in the industry, and our patented performance venting system means kids (or adults) can jump with less effort and for longer! Our patented “cap strip” design leaves a 2" edge around the trampoline for easy string trimming without causing damage to your pads.
Do to spring tension with smaller surface, this trampoline achieves amazing performance.
Photo Gallery of Round Trampolines
Our 12' Round Trampoline Specifications
We use only high-quality products with our in-ground trampoline kits. This includes the retention wall system, the mat, the frame, the springs, the pads, and high-quality fasteners. Here are all of the items that are included with our 12' round in-ground trampoline kit.
- 13-gauge steel frame, black powder-coated & amp; galvanized
- Lower frame and Upper frame quickly snap together
- Push tabs for quick assembly
- 1 person – 12 minute upper and lower frame assembly. (Compared to 2.5 hours + for competitors)
The actual trampoline frame is supported by the lower and upper frame, not by resting on the retention wall.
- Only takes 5 minutes to assemble the 13 universal wall panels!
- 13’ Diameter, UV protected polypropylene
- 10 Rows of stitching (6 rows on the mat, then 4 more rows over the SunGuard UV protection
- strip
- 35lb UV-resistant test thread
- 96 - 5.0 mm V-rings (spring hooks)
- 1.5” UV-resistant strapping to sew the V-rings to the jumping mat fabric.
- 15’ Outside diameter
- 11.5” wide
- 75” thick, high-density foam padding
- 18 oz. Marine Grade vinyl coated Polyester w/UV protection.
- 16 – 1” wide tie straps at frame with quick clip connectors
- 16 Spring loops sewn to the underside of pads to keep the wind from blowing the pads up.
- 8.5” Springs
- 3.15 mm Hard Drawn
- Initial tension after stress relief 18–22 pounds (8.15 kg — 10 kg)
- Stress Relief at 500 °F
- Zink Plate
- Spring is stretched to 10.5” when installed, resulting in 2” of spring load.
Installation Instructions
Do You Have Questions?
In-ground trampolines are safer as they are flush with the ground, reducing fall height. They also blend seamlessly into your landscape, enhancing aesthetic appeal without obstructing views. Additionally, they can be less noisy and more stable during use.
The primary safety advantage is the reduced risk of falling from height. Our in-ground trampolines are at ground level, which significantly diminishes the severity of potential falls compared to above-ground models.
The "mow edge" design allows for easy mowing around the trampoline, reducing the effort required to maintain your lawn and preventing grass growth under the trampoline frame.
Our patented "performance venting" system efficiently releases air around the trampoline edges, enhancing bounce quality and reducing effort, making each bounce higher and less tiring.
From excavation to jumping, installation can take as little as 3 hours, with the retention wall system assembling in just 20 minutes—a stark contrast to all-day assemblies typical of some competitors.
Yes, it is possible to remove or relocate the trampoline, though it involves excavation. We recommend selecting a permanent location to avoid the need for re-installation.
Yes, we offer free delivery within 100 miles of Orem, Utah, making it convenient and cost-effective for local customers to receive our trampolines.
Regular inspections should be done to ensure all parts are tight, and the surface is free of debris. The area around the trampoline should be kept clear of tools and toys.
With proper maintenance and care, our trampolines are built to last. The materials used are resistant to weather and wear, ensuring years of fun.
We offer a comprehensive warranty that covers defects in materials and workmanship. Please refer to our warranty documentation for more details.
Yes, replacement parts are available for purchase. Contact our customer service for details on how to order.