The Best Round, In-Ground Trampoline Kit Available In Utah!
Our 15' round in-ground trampoline system is the fastest and easiest in-ground trampoline to install. Our retention wall system is the strongest in the industry and our patented performance venting system means kids (or adults) can jump with less effort and for longer! Our patented "mow edge" design makes it easy to mow or trim your grass surrounding the trampoline without causing damage or taking extra time.
Need Financing?
You Can Easily Do This With One Or Two People
When we designed the TrampKit in-ground trampoline system we wanted the installation process to be so simple that anyone could do it. The hardest part about installing your trampoline is going to be getting the hole dug. Any landscaping company with a mini-excavator can have the hole dug in a couple of hours or if you're a hardcore DIY'er you can simply rent a machine and do it yourself.
Performance Venting Means Better Jumps With Less Effort
When you install an in-ground trampoline the air below the mat has nowhere to go when someone is jumping. This means it takes more effort to jump. With our patented performance venting you can jump higher, for longer, and with less effort than our competitors trampolines. The performance venting will keep kids jumping for longer.
Our Patented "Mow Edge" Design Makes Mowing Easy
Mowing or trimming the grass around a trampoline can be a real pain. With our patented mow edge design you can run your mower right over the edge without worrying about damaging the trampoline. You can have a nice clean edge around the trampoline, improving the look of your yard, without the hassle. If you have a lawn care company that mows your lawn, they'll love you for this!
Our 15' Round Trampoline Specifications
We use only high-quality products with our in-ground trampoline kits. This includes the retention wall system, the mat, the frame, the springs, the pads, and high quality fasteners. Here are all of the items that are included with our 15' round in-ground trampoline kit.
- Rotomolded Polyethylene w/UV protection (Corrosion proof)
- 72.5” long x 30” high x 3” wide x 1/8”+ thick
- Approximately 50lbs per piece
- Patented “Mow Edge” to avoid damaging safety pads while mowing.
- Patented “Performance Venting integrated into the walls.
- 1 person – 10 minute wall and frame assembly. (Compared to 3.5 hours + for competitors)
- 13 Gauge steel frame black powder coated & galvanized
- 8 Piece top frame & legs pre-installed in the retention walls
- Top frame - 1.9” OD
- Legs - 1.5" OD. (Legs go down through the retention wall and out the bottom with a welded-
on leg plate.
Actual trampoline frame is supported by the legs, not by resting on the retention wall.
- 13’ Diameter, UV protected polypropylene
- 10 Rows of stitching (6 rows on the mat, then 4 more rows over the SunGuard UV protection
strip - 35lb UV resistant test thread
- 96 - 5.0 mm V-rings (spring hooks)
- 1.5” UV resistant strapping to sew the V-rings to the jumping mat fabric.
- 15’ Outside diameter
- 11.5” wide
- 75” thick, high density foam padding
- 18 oz. Marine Grade vinyl coated Polyester w/UV protection.
- 16 – 1” wide tie straps at frame with quick clip connectors
- 16 Spring loops sewn to underside of pads to keep the wind from blowing the pads up.
- 8.5" Springs
- 3.15mm Hard Drawn
- Initial tension after stress relief 18-22 pound (8.15kg - 10kg)
- Stress Relief at 500F
- Zink Plate
- Spring is stretched to 10.5" when installed, resulting in 2” of spring load.